A.H. Window Tinting

Home

Commercial

Commerical Photos

Residential

Residential Photos

Automotive

Automotive Photos

Paint Protection

Decorative

Decorative Photos

News and Events

Contact Us

OLD FASHION SERVICE WITH THE BEST IN TODAY'S TECHNOLOGY

Residential Window Tinting

In the last 20 years, builders have been using mostly vinyl insulated glass.  Many home owners have expressed their dissatisfaction with these windows because of non-efficiency, but ultimately this is a perfect situation for window film. You will hear about all kinds of available glass coatings, but none of them will have the effectiveness of a high quality window film.   What we offer, is the ability to custom tailor your windows, room by room. 

Whether your main concern is Fading, Glare Control, or Temperture Control, we have the film you need.  All of our films at a minimum will offer you 99.9% UVA and UVB rejection. Compare this to the leading manufacturer of windows new Low E 4 glass that only rejects 83% of the UV light,  at an extreme cost. 

FADING: When your primary goal is to reduce fading, the causes below are going to be the primary factors to weigh.

                              40% UV LIGHT EXPOSURE

                              25% HEAT EXPOSURE

                              25% VISIBLE LIGHT EXPOSURE

                              10%  MISC. (moisture in the air, fabric and finish strength, etc.)

It is imposible to hault fading, however you can tremendously effect how quickly it happens.  With window film, you can reduce fading by as much as 90%.

GLARE CONTROL

 When your primary goal is glare, the first thing to weigh in is going to be the angle at which the suns rays are entering your glass.  The more steep the angle, the more glare reduction you will need.  We carry films that will let in as much as 75% of Visible  Light, and as little as 5%.  Whether your goal is to soften light, or virtually eliminate it, we can provide the right film for you.

 TEMPERATURE CONTROL

 When your primary goal is temperature control, the first thing to weigh in is going to be how much light are you willing to loose in order to achieve a high Solar Energy Rejection number.  If you aren’t willing to loose any light, you’ll want to look into our Infrared Blocking films.  They provide lots of light with very high heat rejection numbers, while maintaining a Low Emissivity. (Low E) If you are willing to reduce the light in order to reduce the heat, you can look into either our Neutral or Reflective films.  These films will provide very soft light with very high heat rejection numbers.  Either way we can provide the right film for you.

 OUR GOAL

 Our goal is to help you find the perfect solution, for your situation. 


Contact us today for a free estimate!    (540) 840-7290   andrewhellier@comcast.net